Water Damage Restoration in Los Angeles
Pick your area or enter your ZIP to see local companies.
Choose your area
Each area page lists local water damage restoration companies you can contact directly.
- WestsideBrowse companies
- San Fernando ValleyBrowse companies
- Downtown / EastsideBrowse companies
- Long BeachBrowse companies
- South BayBrowse companies
Map and ZIP codes (131 ZIP codes)
- Westside
- San Fernando Valley
- Downtown / Eastside
- Long Beach
- South Bay
- Not yet covered
ZIP boundaries: US Census Bureau ZIP Code Tabulation Areas.
- Westside
- 90024 90025 90034 90035 90045 90049 90064 90066 90067 90073 90077 90094 90095 90210 90211 90212 90230 90232 90272 90291 90292 90293 90401 90402 90403 90404 90405
- San Fernando Valley
- 91302 91303 91304 91306 91307 91311 91316 91324 91325 91326 91330 91331 91335 91340 91342 91343 91344 91345 91352 91356 91364 91367 91371 91401 91402 91403 91405 91406 91411 91423 91436 91501 91502 91504 91505 91506 91601 91602 91604 91605 91606 91607 91608
- Downtown / Eastside
- 90012 90013 90014 90015 90017 90021 90022 90023 90026 90031 90032 90033 90039 90041 90042 90057 90063 90065 90071 90079 90090
- Long Beach
- 90755 90802 90803 90804 90805 90806 90807 90808 90810 90813 90814 90815 90822 90831
- South Bay
- 90245 90247 90248 90249 90250 90254 90260 90266 90274 90275 90277 90278 90501 90502 90503 90504 90505 90506 90710 90717 90731 90732 90744 90745 90746 90747
How requests work
We assign one partner per service in each area. None is assigned for this service in Los Angeles yet, so a request comes to our team and we contact you about next steps. It is never resold.
You can also browse other listed qualifying companies. Directory listings do not grant a partner slot or change where a TrustedLocals request is routed.
Partners pay for an exclusive TrustedLocals request-routing slot for their service and area. Payment does not change source ratings.
What a proper water damage job looks like
If you can, stop the water at the main valve, and turn off power to the wet area at the breaker panel, but only if you can reach the panel without standing in water. Then get drying started. Water moves into drywall, subfloor, insulation and framing within hours, and what you can see on the surface is rarely all of it.
Read the full guide
The industry standard (IICRC S500) sorts water into three categories by how contaminated it is. Category 1 is clean water from a burst supply pipe or an overflowing tub. Category 2 has picked up some contamination, from a dishwasher, a washing machine or a sump pump. Category 3 is grossly contaminated water: sewage, a toilet that overflowed with waste in it, or floodwater from outside. The category is judged on site, and clean water left standing does not stay clean. It decides what can be dried in place and what has to come out.
Standing water is pumped out first. Then the technicians map where the water went with moisture meters and often a thermal camera, write down the readings, and measure again every day until the materials read dry. Materials that cannot be dried, such as soaked carpet pad, swollen particleboard and drywall touched by Category 3 water, are removed. Fans and dehumidifiers run until the daily readings match a normal dry reading for each material. Drying is finished when the numbers say so, not when the surface feels dry.
In a home built before about 1980, drywall compound, plaster, acoustic ceilings and floor tiles can contain asbestos, and older homes may have lead paint. The South Coast air district requires an asbestos survey before most renovation and demolition work, and asbestos removal is a separately certified trade. A crew that starts cutting out walls in an older home without asking about this is a warning sign.
Mold is the reason speed matters. Public health guidance says to dry wet materials within a day or two to prevent mold growth, so the goal is to have drying under way inside that window. That is also why a slow leak found late is often a mold job as well as a water job.
For insurance, keep three things: photos taken before anything was moved, the company's moisture log, and a note of what caused the water and when you found it. Call the insurer early, but do not wait for an adjuster before drying starts: standard homeowner policies require you to take reasonable steps to stop further damage, and emergency extraction and drying are exactly that.
California has no separate restoration license. A company doing work worth $1,000 or more, or any work that needs a building permit, needs a state contractor license from the Contractors State License Board that covers the work. The record at cslb.ca.gov shows whether the license is active, whether it is bonded, and whether workers' compensation is on file. Ask which IICRC certifications the technicians hold.
Read the homeowner guide: what to do, who to call, and how to check the company
Common questions
What should I do first after water damage?
Stop the source if it is safe to do so, for example by closing the main water valve. Turn off power to affected rooms if water is near outlets or appliances. Move valuables out of the wet area, and take photos before anything is moved or removed.
What does water damage restoration involve?
The company extracts standing water, measures moisture in floors and walls, removes materials that cannot be dried, and runs drying equipment until readings reach dry standards. The water category matters: clean supply-line water is handled differently from Category 2-3 water from drains, sewage or flooding.
Will my insurance cover it?
That depends on your policy and the cause. Sudden events such as a burst pipe are treated differently from slow leaks or flooding. Call your insurer, and keep photos and the company's moisture records for the claim.
How long does drying take?
Drying takes until the daily moisture readings reach a normal dry level for each material, and the company should show you those readings day by day. A company that removes its equipment without a final set of readings has not finished.
Do I have to use the company my insurer suggests?
No. In California you choose who does the work. The state's claims rules let an insurer suggest a company only if you ask or after telling you in writing that the choice is yours, and if you take that suggestion the insurer must stand behind the result. Your insurer can ask for photos and records, but the contract is yours.
What is a moisture log and why does it matter?
A moisture log is a record of where moisture was measured, the readings, and the dates, from the first visit to the dry-out. It proves the extent of the loss to an insurer and shows the drying was completed.
How does TrustedLocals choose a water damage restoration partner for Los Angeles?
We list companies rated 4.5+ on Google and pick one partner per area. Google and Yelp ratings are shown separately from reviews of TrustedLocals jobs. Payment buys the routing slot, not a rating.
Where does my TrustedLocals request go?
It depends on your ZIP code. Where no partner is active for this service, a request comes to our team, and we contact you about next steps. Enter your ZIP code on the request form to see what applies to you. Your request is never put up for bids.
Can I browse other companies in a partner's area?
You can also browse other listed qualifying companies. Directory listings do not grant a partner slot or change where a TrustedLocals request is routed. Website and call links contact a business directly, outside TrustedLocals request routing.
Is there a fee to send a request?
No. Sending a request is free. You pay the company directly for the work, at the price they quote you.
What if something goes wrong?
Tell us. We can remove a company that falls short.