HVAC in Westside, Los Angeles

HVAC: 90 local pros

Change area

Your comparison (0 of 3)

Choose up to three companies using Compare on their cards. Kept only on this page, including while you browse more results.

All local pros

1–20 of 90
How we list companies

Companies are listed when their Google rating is 4.5 or higher. When a current Yelp listing for the same business is on file, we combine both ratings, weighted by review count, and it must still be 4.5 or higher. Ratings belong to Google and Yelp, separate from reviews of TrustedLocals jobs.

A listing is not an endorsement. You can also browse other listed qualifying companies. Directory listings do not grant a partner slot or change where a TrustedLocals request is routed. Website and call links contact a business directly, outside TrustedLocals request routing.

Prefer we help? Send a request and our team gets back to you.

ZIP codes in Westside

27 ZIP codes, 290,842 households (ACS 2020-2024)

9000190002900039000490005900069000790008900109001190012900139001490015900169001790018900199002090021900229002390024 · Westwood: Westside90025 · West Los Angeles: Westside9002690027900289002990031900329003390034 · Palms: Westside90035 · Pico-Robertson: Westside90036900379003890039900409004190042900439004490045 · Westchester: Westside90046900479004890049 · Brentwood: Westside9005690057900589005990061900629006390064 · Rancho Park: Westside9006590066 · Mar Vista: Westside90067 · Century City: Westside90068900699007190073 · West Los Angeles: Westside90077 · Bel Air: Westside90079900899009090094 · Playa Vista: Westside90095 · Westwood: Westside9020190210 · Beverly Hills: Westside90211 · Beverly Hills: Westside90212 · Beverly Hills: Westside90220902219022290230 · Culver City: Westside90232 · Culver City: Westside9024090241902429024590247902489024990250902549025590260902629026390265902669027090272 · Pacific Palisades: Westside90274902759027790278902809029090291 · Venice: Westside90292 · Marina del Rey: Westside90293 · Playa del Rey: Westside903019030290303903049030590401 · Santa Monica: Westside90402 · Santa Monica: Westside90403 · Santa Monica: Westside90404 · Santa Monica: Westside90405 · Santa Monica: Westside905019050290503905049050590506906019060290603906049060590606906389064090650906609067090701907039070490706907109071290713907159071690717907239073190732907449074590746907479075590802908039080490805908069080790808908109081390814908159082290831910019100691007910089101091011910169102091024910309104091042910469110191103911049110591106911079110891201912029120391204912059120691207912089121091214913019130291303913049130691307913119131691321913249132591326913309133191335913409134291343913449134591350913519135291354913559135691364913679137191381913849138791390914019140291403914059140691411914239143691501915029150491505915069160191602916049160591606916079160891702917069171191722917239172491731917329173391740917419174491745917469174891750917549175591765917669176791768917709177391775917769178091789917909179191792918019180393510935329353493535935369354393544935509355193552935539356393591
ZIP boundaries: US Census Bureau ZIP Code Tabulation Areas.
  • 90024Westwood
  • 90025West Los Angeles
  • 90034Palms
  • 90035Pico-Robertson
  • 90045Westchester
  • 90049Brentwood
  • 90064Rancho Park
  • 90066Mar Vista
  • 90067Century City
  • 90073West Los Angeles
  • 90077Bel Air
  • 90094Playa Vista
  • 90095Westwood
  • 90210Beverly Hills
  • 90211Beverly Hills
  • 90212Beverly Hills
  • 90230Culver City
  • 90232Culver City
  • 90272Pacific Palisades
  • 90291Venice
  • 90292Marina del Rey
  • 90293Playa del Rey
  • 90401Santa Monica
  • 90402Santa Monica
  • 90403Santa Monica
  • 90404Santa Monica
  • 90405Santa Monica

Repairs, replacement and what to ask

Heating and cooling faults fall into four groups. Electrical: a tripped breaker or a failed small part such as a capacitor. Airflow: a clogged filter, a frozen coil or leaking ducts. Refrigerant: a leak, which should be found and fixed, not just topped up. The equipment itself: a failed compressor, or a cracked heat exchanger in a gas furnace, which can put carbon monoxide into the home and means the furnace stays off until it is replaced. A diagnosis should name which, in writing, before any repair-or-replace conversation.

Read the full guide

Replacement is a design job, not a swap. The right size comes from a load calculation (ACCA Manual J) based on the home's insulation, windows, orientation and ducts. It should not be copied from the old unit, which was often the wrong size. Oversized systems switch on and off too often, cool unevenly and fail early. Ducts matter as much as the equipment: leaky or undersized ducts waste much of what the system produces.

Replacing a system needs a mechanical permit from your city's building department; in the City of Los Angeles that is the Department of Building and Safety. For most system changeouts and for duct replacements over 25 feet, California's energy code also requires an independent field test by a certified rater (an ECC-Rater, formerly a HERS rater), which shows the ducts are sealed and, where the code calls for it, that the refrigerant charge is right.

If you are replacing a central system, ask about a heat pump. Los Angeles has a mild climate, and one unit both heats and cools. Two checks come first: whether the electrical panel has room for the new circuit, since a panel upgrade is a job of its own, and whether the existing ducts can carry the airflow a heat pump needs. Ductless mini-splits suit homes without ducts and additions. Rebate programs from the state and utilities change often; ask the contractor what is current and get it in writing.

Refrigerants are changing. Equipment built since 2025 uses R-454B or R-32 instead of R-410A, though R-410A systems built before then can still be sold from stock, and a failed outdoor unit on an existing R-410A system can still be replaced on its own. Ask which refrigerant a quoted system uses and what that means for parts and service later.

HVAC contractors hold the C-20 classification from the Contractors State License Board, and the law requires them to carry workers' compensation whether or not they have employees. Check the record at cslb.ca.gov for an active license, the bond and a workers' compensation policy rather than an exemption. Ask who will do the install, whether the company gets the permit, and whether the field test is included.

Maintenance is simple: change the filter on schedule, keep the outdoor unit clear, and have the system checked before the cooling season. A spring check finds weak capacitors, dirty coils and slow refrigerant leaks before a heat wave does.

Read the homeowner guide: what to do, who to call, and how to check the company

Questions about hvac